Project

General

Profile

Start to build Scol using CMAKE » History » Revision 24

Revision 23 (hector, 01/11/2016 02:28 PM) → Revision 24/45 (hector, 01/18/2016 11:14 AM)

h1. Start to build Scol using CMAKE 


 h2. Tools 

 h3. Common to all platforms 

 * "CMake":http://www.cmake.org/download/ 
 * Visual Studio (not free) 
 * "Tortoise SVN":http://tortoisesvn.net/ (or any SVN client) 
 * "Tortoise git":https://code.google.com/p/tortoisegit/ (or any Git client too) 

 h3. Windows target 

 The minimum compiler supported is the one in Visual Studio 2010. 
 You can try with a newer version at your own risks ! 

 h3. Android target 

 _With standard tools_ 

 i.e. free tools found on the web or provided by Google 

 * "Java Development Kit (JDK)":http://www.oracle.com/technetwork/java/javase/downloads 
 * "Android SDK":https://developer.android.com/sdk/installing 
 * "Native Development Kit (NDK)":https://developer.android.com/tools/sdk/ndk 
 * "Apache ANT":http://ant.apache.org/ 

 _With Tegra Android Development Pack_ 

 A package provided by Nvidia to build applications for Android. The download process requires authentication to the Nvidia Developper Network (it's free and not too spammy though) 

 * "TADP":https://developer.nvidia.com/gameworksdownload 
 * On setup, let it download everything or at least the tools described in the previous section. 

 _SDK preparation_ 

 You should launch the SDK to download other tools like emulators for each API you want to target. 
 (Our target API is 17 so you can get any emulator above). 

 h3. Linux target 

 Not supported yet. 

 h3. Mac OS target 

 Not supported yet. 


 h2. Get the Scol sources 

 Scol uses Subversion for source control and you can use your SVN client to get the source code. 

 So first retrieve the sources from "https://svn.scolring.org/trunk/", accept the certificate and go take some coffee. 
 The source directories contains most of the dependencies, and since some of them are modified they are provided in the sources. 

 Some sources like curl use Git as source control and are downloaded when building, so make sure it's installed before building the project 



 h2. Dependencies search paths 

 h3. Windows 

 Once you get the sources, you can execute "setWindowsSearchPaths.bat" in the dependencies directory. 
 !!WARNING!! when you execute the bat file using the mouse the current directory is wrong. 
 You need to start a DOS command line "cmd.exe" as administrator and go to the dependencies directory to start the bat file manually. 
 
 This will add needed environment variables and paths. 

 h3. Android 

 If you downloaded the TADP, the following variables are likely to be defined already (or they should look alike). 
 If not, add these to the environment variables 
 * ANDROID_HOME : path/to/sdk 
 * ANDROID_SDK_HOME : path/to/sdk 
 * ANDROID_SDK : path/to/sdk 
 * ANDROID_NDK : path/to/ndk 
 * ANT_HOME : path/to/ant 
 * JAVA_HOME : path/to/jdk -- should be something like "C:\Progra~1\Java\<jdkfolder>" 
 * CMAKE : path/to/cmake 

 Then you should add these variables into the PATH: 

 @%ANDROID_NDK%;%ANT_HOME%\bin;%ANDROID_SDK%\tools;%ANDROID_SDK%\platform-tools;%CMAKE%;%JAVA_HOME%\bin;@ 




 h2. Build needed dependencies 

 h3. From Windows, for Windows 

 # Launch cmake-gui from a Visual Studio command line (it configures environment so you can build things correctly) 
 # Specify the source folder to trunk/dependencies and the build to trunk/dependencies/build/windows/x86 
 # Hit Configure. In the message box, select your Visual Studio version as generator, and check "Use default native compilers". 

 You will see a list of categories, under which are variables to tweak build parameters. 
 The category SCOLDEPS contains CMake variables that enable/disable the build of individual SCOL dependencies. 
 Some of these dependencies depend on one or several others. Since CMake needs to detect these "sub-dependencies" when configuring, 
 we need to make several build passes, in order to build said "sub-dependencies" before the dependencies that depend on them. 

 # Leave all variables at their default values. 
 # Hit Configure, specifying no toolchain, using your Visual Studio version as generator. 
 # When configuring is done, you will see new variables appear in red. Simply hit Configure again. 
 # Hit Generate to generate a Visual Studio project. 
 # Build the project in Visual Studio (Build->Batch Build, check debug and release for "INSTALL" configuration). 
 # When the build is done, in CMake, check LIBPNG, OPENAL, CURL under SCOLDEPS (leave the other variables vaiables as they are). 
 # Hit Configure again. When configuring is done, you will see new variables appear in red. Leave them at their default values. 
 # Repeat steps 2 and 3. 3 to 5. 
 # Check OGRE, CAUDIO, LIBHARU under SCOLDEPS, hit Configure, and repeat steps 2 and 3. 3 to 5. 
 # Check HYDRAX and SKYX under SCOLDEPS, hit Configure, and repeat steps 2 and 3. 3 to 5. 

 Now every required dependency should be built. The ones that we left unchecked aren't needed. 

 h3. From Windows, for Android 

 Do the same as for Windows target, but 
 * Set source folder to trunk/dependencies and build folder to trunk/scol/build/android/<target abi> 
 * Specify the generator : "NMake" 
 * The toolchain for crosscompile : trunk/dependencies/CMake/toolchain/android.toolchain.cmake 
 * Build dependencies with "nmake install" command from a command line. 




 h2. Build the Scol project 

 As for the dependencies: 

 h3. Windows target 

 * Set source folder to trunk/scol and build folder to trunk/scol/build/windows/x86 
 * Configure, generate and build from Visual Studio 

 h3. Android target 

 * Set source folder to trunk/scol and build folder to trunk/scol/build/android/<target abi> 
 * If you're using Nsight with Visual Studio (TADP), some build paramaters should be modified for each build if you want to install and test the project on a device : 
   - Open ScolLauncher subproject -> properties 
   - Configuration Properties -> General -> Configuration Type -> Make Application (ndk-build -> .apk|.so|.a) 
   - Configuration Properties -> Deployment -> Fast Deploy -> No 
   - Configuration Properties -> Ant Build -> Skip Ant Step -> No 
 * Without TADP, after it's build, go to trunk/scol/build/android/<target abi>/App/bin, and run "ant debug install" if you wish to install the project on an emulator or your device   

 h1. Start your new plugin 

 h2. Source paths 

 Start by creating a directory with your new plugin name in the trunk/scol/plugins folder. 
 For example trunk/scol/plugins/myPlugin 

 Usually we prefer to separate the sources and the includes. 
 So creates a "src" and "include" directory in your plugin folder. 

 Creates the empty files you will need for your project, usually : 
 - include/myplugin.h for your classes declaration 
 - src/myplugin.cpp for your classes definition 
 - src/scolplugin.cpp for the Scol binding functions 

 h2. Dependencies 

 If your project need an external SDK or dependencies, add then in the trunk/dependencies directory. 
 Then create a findMydepname.cmake file in trunk\scol\CMake\Packages. 
 You can copy and change an existing Find.cmake file to make yours. 
 Start from a simple one like FindMyo.cmake for example. 

 h2. Cmake files 

 It's time to creates the CMAKE script for your plugin. 

 Create a "CMakeLists.txt" file in the plugin directory. 
 trunk/scol/plugins/myPlugin/CMakeLists.txt 

 And edit the file with a text editor. 

 <pre> 
 #------------------------------------------------------------------- 
 # This file is part of the CMake build system for Scol 
 # 
 # The contents of this file are placed in the public domain. Feel 
 # free to make use of it in any way you like. 
 #------------------------------------------------------------------- 

 ############################################################ 
 # CmakeList file for Myplugin 
 ############################################################ 

 #Your project name 
 PROJECT(myPLugin) 

 # define header and source files for the library 
 set (MYPLUGIN_HEADER_FILES 
   include/myplugin.h 
 ) 

 set (MYPLUGIN_SOURCE_FILES 
   src/myplugin.cpp 
   src/scolplugin.cpp 
 ) 

 # Add includes directories from dependencies 
 #    include_directories(include ${MYDEP_INCLUDE_DIRS}) 

 # Add definition for P4 optimizations, warnings removal. 
 add_definitions(-DOPTI_P4 -D_CRT_SECURE_NO_WARNINGS -D) 

 # Add dependencies libraries 
 #    set(LIBRARIES 
 #      ${MYDEP_LIBRARIES} 
 #      ${ZLIB_LIBRARIES} 
 #      ${PNG_LIBRARIES} 
 #    ) 

 # setup Scol plugin target 
 add_library(myPLugin 
   ${Scol_LIB_TYPE} 
   ${MYPLUGIN_HEADER_FILES} 
   ${MYPLUGIN_SOURCE_FILES} 
 ) 
 add_dependencies(myPLugin kernel) 

 # set the dll version. 
 set_target_properties(myPLugin PROPERTIES VERSION ${Scol_VERSION} SOVERSION ${Scol_VERSION_MAJOR}) 
 target_link_libraries(myPLugin ${LIBRARIES}) 

 # install Scol 
 scol_config_plugin(myPLugin) 
 install(FILES ${MYPLUGIN_HEADER_FILES} DESTINATION include/SCOL/plugins/myPLugin) 
 </pre> 

 Now we need to declare this new plugin in the common Scol cmake files. 
 Edit the trunk/scol/CMakeLists.txt file and add your plugin definition like the following. 

 If you don't have dependencies. 
 <pre> 
 option(Scol_BUILD_MYPLUGIN "Build myPluginplugin, my library" TRUE) 
 </pre> 

 If you have depencies 
 <pre> 
 cmake_dependent_option(Scol_BUILD_MYPLUGIN "Build myPlugin, my library." TRUE "MYDEP_FOUND;ZLIB_FOUND;PNG_FOUND" FALSE) 
 </pre> 

 Now edit the trunk/scol/plugin/CMakeLists.txt file and add the following. 
 <pre> 
 # Configure myPlugin plugin build 
 if (Scol_BUILD_MYPLUGIN) 
   add_subdirectory(myPlugin) 
 endif () 
 </pre> 

 Only if you have dependencies, edit the trunk/scol/CMake/ScolDependencies.cmake file and add the dependencies resolution as the following 

 <pre> 
 # Find MyDep 
 find_package(MYDEP) 
 macro_log_feature(MYDEP_FOUND "Mydep" "MydepLibrary" "http://Mydep.org/" FALSE "" "") 
 </pre> 

 h2. Almost done 

 Open the CMAKE-gui again. 
 Hit the "Configure button" and check if you found your plugin in the scol group. 
 Then hit the generate button, and open the scol.sln project again. 

 You should have the project added in Visual Studio.